AT-1 configuration
simulator

A simulated AT-1 with its real software (version 35) and its own configuration page, as you see it at 192.168.1.1 on the unit's WiFi. Change settings, load the AT_INFO.LOG from your unit's USB stick, and write the configuration file you then load into your AT-1.

LED 1 · 1090 MHz receiver

LED 2 · FLARM

LED 3 · GPS, WiFi, system

Configuration file

The AT-1 reads its configuration from a USB stick: the file AT_INFO.LOG it writes itself, renamed to .TXT.

Load configuration file into the AT-1

http://192.168.1.1

AT-1 configurationsimulator

Configuration file

AT-1 configuration
simulator